41-2510-8-scaled.jpg
41-2510-8-scaled.jpg

EMPI Fuel Pump, 1.5 - 4.0 PSI, with Fittings & Clamps

$59.95

Solid state 12 volt circuitry for reliability and made by EMPI with a H.D. metal case so it will work right and last a long time. Available for standard carburetor use in the 1.5 to 4.0 PSI range or also for high performance use. (It is highly recommended that a fuel pressure regulator be used with any of these pumps on a carburetor application).

Quantity:
Add To Cart

Solid state 12 volt circuitry for reliability and made by EMPI with a H.D. metal case so it will work right and last a long time. Available for standard carburetor use in the 1.5 to 4.0 PSI range or also for high performance use. (It is highly recommended that a fuel pressure regulator be used with any of these pumps on a carburetor application).

Solid state 12 volt circuitry for reliability and made by EMPI with a H.D. metal case so it will work right and last a long time. Available for standard carburetor use in the 1.5 to 4.0 PSI range or also for high performance use. (It is highly recommended that a fuel pressure regulator be used with any of these pumps on a carburetor application).

C-6

41-2510-8

You Might Also Like

Intake Boot Clamp - Large, Each
$2.50
Throttle Cable, 2610mm, 1975-79 Beetle and Superbeetle
$12.95
Billet Fuel Pump Block-Off with Hardware, Polished
$27.95
40/44 HPMX (IDF) Carburetor Casting Gasket, Pair
$12.95
Fuel Gauge, Covers both 60/90 OHM 12 Volt & 73-10 OHM Requires VW Sending Unit or P/N: V221012
$58.95